LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Engine Mechanical - Overhaul - (LF, L3)) >> Timing Chain Assembly >> Front Oil Seal Assembly Note

Front Oil Seal Assembly Note

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2009 Mazda B2300, 2009 Mazda 5, 2008 Mazda Tribute, 2008 Mazda B2300, and 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply clean engine oil to the oil seal.
  2. Push the oil seal slightly in by hand.
  3. Compress the oil seal using the SST  and a hammer.
    Fig 1: Compressing Oil Seal
    G02831666Courtesy of MAZDA MOTORS CORP.
    Fig 2: Installing Oil Seal
    G02831667Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals