LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Engine Mechanical - Overhaul - (LF, L3)) >> Cylinder Block (I) Assembly >> Piston Ring Assembly Note

Piston Ring Assembly Note

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2009 Mazda B2300, 2009 Mazda 5, 2008 Mazda Tribute, 2008 Mazda B2300, and 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the two oil control ring segments and spacer.
  2. Verify that the second ring is installed with scraper face side downward.
  3. Verify that the top ring is installed with scraper face side inner of upper.
    Fig 1: Installing Piston Rings
    G02831637Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals