LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Engine Mechanical - Overhaul - (LF, L3)) >> Cylinder Block (I) Assembly >> Piston Assembly Note

Piston Assembly Note

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2009 Mazda B2300, 2009 Mazda 5, 2008 Mazda Tribute, 2008 Mazda B2300, and 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the end gap of each ring as indicated in the figure.
    Fig 1: Positioning Piston Ring End Gaps
    G02831638Courtesy of MAZDA MOTORS CORP.
  2. Insert the piston and connecting rod into the cylinder with the arrow mark to front of the engine.
    Fig 2: Installing Piston
    G02831639Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals