Torque Specifications

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATIONS

Application

Ft. Lbs. (N.m)

Axle Shaft Lock Bolt

⁽¹⁾ 23.3-28.2 (31.5-38.5)

Brake Caliper Mounting Bolt

75.3-87.0 (102-118)

Front Lower Arm Ball Joint

27.3-37.1 (37.2-50.4)

Front Lower Arm Ball Joint Nut & Bolt

31.8-43.3 (43.1-58.8)

Front Stabilizer Control Link Nut

29.8-40.3 (40.3-54.7)

Intermediate Shaft Bearing Bracket Bolts

31-45 (42-61)

Stabilizer Control Link Upper Nut

29.8-40.3 (40.3-54.7)

Steering Knuckle

39.8-54.2 (53.9-73.5)

Tie-Rod Ball Joint Nut

27.3-37.1 (37.2-50.4 )

INCH Lbs. (N.m)

ABS Wheel Speed Sensor

36-53 (4-6)

⁽¹⁾	Tighten lock bolt to specification then turn the bolt an additional 85-95 degrees.