LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 553 (Fwd Axle Shafts) >> Removal & Installation >> Axle Shaft >> Installation >> Axle Shaft Installation Note >> Left Side

Left Side

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the axle shaft into the wheel hub. See Fig 1 .
  2. Apply transaxle oil to the oil seal lip.
  3. Install the axle shaft to the transaxle.
  4. After installation, pull the transaxle side outer ring forward to confirm that the axle shaft is securely held by the clip.
Fig 1: Installing Left Side Axle Shaft
G00318577Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals