LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 553 (Fwd Axle Shafts) >> Overhaul >> Intermediate Shaft >> Reassembly >> Dust Seal (Right Side) Assembly Note

Dust Seal (Right Side) Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to the new dust seal lip.
  2. Install the new dust seal (right side) using the Handle (49-F027-003) and the Dust Seal Installer (49-B025-004). See Fig 1 .
Fig 1: Assembling Dust Seal (Right Side)
G00356663Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals