Boot Assembly Note
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The wheel side and transaxle side boots are different.
- Fill the boot (wheel side) with the specified grease from a tube, not by hand. Use the specified grease supplied in the boot kit. See BOOT GREASE STANDARD AMOUNT
table.WARNING: Continuous exposure to grease may cause skin cancer. Do not touch grease.CAUTION: Apply it from the tube to prevent foreign matter from entering the boot.
- Install the boot with the splines of the shaft still wrapped in tape from disassembly.
- Remove the tape.
BOOT GREASE STANDARD AMOUNT
| Specifications | Amount - oz. (L) | |
|---|---|---|
| Automatic Transaxle | ||
| 2.0L | 3.29-3.63 (0.097-0.107) | |
| 2.3L | 3.89-4.23 (0.115-0.125) | |
| Manual Transaxle | ||
| 2.0L | 3.89-4.23 (0.115-0.125) | |