LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Wheel Cylinders >> Removal

Wheel Cylinders: Removal

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Remove the tire and wheel assembly.
  2. Remove the brake drum. See REAR BRAKE DRUM  . Remove the brake shoes. See REAR BRAKE SHOES  .
  3. Clean the dirt and foreign material around the wheel cylinder. Remove the bleeder valve.
  4. Disconnect the brake pipe fitting from the wheel cylinder. Plug the open brake pipe ends. Remove the wheel cylinder mounting bolts. Remove the wheel cylinder. See Figure .
scientia non olet · About LEMON Manuals