LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Rear Brake Hose >> Installation

Rear Brake Hose: Installation

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake hose to the vehicle. Install the rear brake hose retaining bolt to the rear brake hose. Tighten the retaining bolt to specification. See TORQUE SPECIFICATIONS  .
  2. Install the brake hose to the bracket. Install the retainer clip to the brake hose.
  3. Install the rear brake pipe to the brake hose. Tighten the fitting to specification. See TORQUE SPECIFICATIONS  .
  4. Bleed the brake hydraulic system. See BLEEDING BRAKE SYSTEM  . Lower the vehicle.
scientia non olet · About LEMON Manuals