LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Rear Brake Drum >> Installation

Rear Brake Drum: Installation

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the Hub Cleaning Kit (J-42450-A) to clean the hub.
  2. Clean the mating surface on the inside of the brake drum. Using the Rotor/Drum Flange Resurfacing Kit (J-41013).
  3. Install the brake drum. Align the marks made during the brake drum removal.
  4. Install the tire and wheel assembly. Lower the vehicle.
scientia non olet · About LEMON Manuals