LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Pedal Assembly >> Removal

Park Brake Pedal Assembly: Removal

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout/insulator panel. Remove the left carpet retainer. Position the carpet aside.
  2. Remove the PCM and bracket. See POWERTRAIN CONTROL MODULE under COMPUTERIZED ENGINE CONTROLS in REMOVAL, OVERHAUL & INSTALLATION - ALERO, GRAND AM & MALIBU article in ENGINE PERFORMANCE.
  3. Remove the park brake pedal assembly nuts. Remove the park brake pedal assembly.
  4. Disconnect the electrical connection from the pedal assembly. Remove the park brake cable from the pedal attachment point. Using the Parking Brake Cable Release Tool (J-37043) cable release tool, remove the cable from the park brake pedal at attachment point.
scientia non olet · About LEMON Manuals