LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Pedal Assembly >> Removal

Brake Pedal Assembly: Removal

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left instrument panel insulator. Disconnect the accelerator cable from the accelerator pedal.
  2. Disconnect the brake pedal pushrod from the brake pedal.
  3. Remove the brake switch from the brake pedal. Disconnect the electrical harness from the brake pedal.
  4. Remove the upper and the lower mounting nuts from the brake pedal assembly. Remove the brake pedal assembly.
scientia non olet · About LEMON Manuals