LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Pedal Assembly >> Installation

Brake Pedal Assembly: Installation

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake pedal assembly.
  2. Install the upper and the lower mounting nuts to the brake pedal assembly. Tighten the mounting nuts to specification. See TORQUE SPECIFICATIONS  .
  3. Connect the brake pedal pushrod to the brake pedal. Connect the electrical harness to the brake pedal.
  4. Install the brake switch to the brake pedal. Connect the accelerator cable to the accelerator pedal. Install the left instrument panel insulator.
scientia non olet · About LEMON Manuals