Adjusting Screw Removal
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Remove the rear wheel and tire. Remove the brake drum. See REAR BRAKE DRUM under REMOVAL & INSTALLATION.
- Remove the adjuster spring. Disengage the adjuster spring hook end from the tab on the adjuster actuator. See Figure .
- Use the Brake Shoe Spanner and Spring Remover (J-38400) in order to spread the brake shoes apart. Remove the adjuster.