Rear Brake Rotor: Notes

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Special Tools Required: Rotor/Drum Flange Resurfacing Kit (J-41013) and Wheel Hub/Flange Resurfacing Kit (J-42450-A).

NOTE: Any NEW rotor must have the protective coating removed from the friction surfaces before being placed in service. Remove the protective coating using denatured alcohol or an equivalent, and wipe the surface clean with clean cloths. DO NOT use gasoline, kerosene, or other oil base solvents which may leave an oily residue. This residue is damaging to the brake lining and is flammable.