LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 543 (Disc Brakes) >> Removal & Installation >> Rear Brake Hardware >> Removal

Rear Brake Hardware: Removal

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake caliper from the mounting bracket and support the brake caliper with heavy mechanic's wire, or equivalent. It is not necessary to disconnect the hydraulic brake flexible hose from the caliper. See REAR BRAKE CALIPER  .
  2. Remove the brake pads from the brake caliper bracket.
  3. Remove the brake pad retainers from the brake caliper bracket.
  4. Remove the brake caliper bracket. See REAR BRAKE CALIPER BRACKET  .
  5. Mount the brake caliper bracket in a vise.
scientia non olet · About LEMON Manuals