LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 543 (Disc Brakes) >> Removal & Installation >> Rear Brake Hardware >> Installation

Rear Brake Hardware: Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all parts in clean, denatured alcohol.
  2. Dry with low pressure, non-lubricated, filtered air.
  3. Inspect the brake caliper bracket for cracks. If cracked, replace bracket.
  4. Lubricate the brake caliper pin bolt sleeves with high temperature silicone lubricant.
  5. Install the brake caliper bracket. See REAR BRAKE CALIPER BRACKET  .
  6. Install the brake pad retainers to the bracket caliper bracket.
  7. Install the brake pads to the bracket caliper bracket.
  8. Install the brake caliper to the brake caliper bracket. See REAR BRAKE CALIPER  .
scientia non olet · About LEMON Manuals