Installation (Rear)
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Position the park brake cable into the support bracket and install the cable retaining pin.
- Install the park brake cable to the actuator lever.
- Connect the retainer that holds the cable to the support bracket.
- Connect the rear cable to the front cable.
- For the right rear cable, connect the cable to the clip. See Figure .
- For the left rear cable, install the equalizer stud to the equalizer nut, which is part of the equalizer assembly.
- Adjust the park brake. See PARK BRAKE ADJUSTMENT under ADJUSTMENTS & INSPECTIONS.
- Lower the vehicle.