LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Power Rack & Pinion Steering System) >> Repair Instructions >> Power Steering Pump Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Power Steering Pump Bracket & Mounting Bolts
    GM1201382Courtesy of GENERAL MOTORS CORP.
  1. Remove the power steering pump. Refer to Power Steering Pump Replacement (4.2L) .
  2. Remove the drive belt tensioner. Refer to DRIVE BELT TENSIONER REPLACEMENT .
  3. Remove the power steering pump bracket mounting bolts.
  4. Remove the power steering pump bracket.
scientia non olet · About LEMON Manuals