LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Power Rack & Pinion Steering System) >> Repair Instructions >> Power Steering Pulley Replacement (4.2L) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump Pulley Remover
    GM649303Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper radiator air intake baffle. Refer to AIR INTAKE BAFFLE REPLACEMENT - RADIATOR .
  2. Remove the drive belt. Refer to DRIVE BELT REPLACEMENT .
  3. Remove the power steering pump pulley using J 25034-C  . See Special Tools and Equipment .
scientia non olet · About LEMON Manuals