LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Power Rack & Pinion Steering System) >> Repair Instructions >> Power Steering Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Hose Assembly At Power Steering Cooler
    GM687441Courtesy of GENERAL MOTORS CORP.
  1. Remove the radiator air intake baffle. Refer to AIR INTAKE BAFFLE REPLACEMENT - RADIATOR .
  2. Install a drain pan under the vehicle.
  3. Disconnect the power steering hose assembly from the power steering cooler.
    4. Fig 2: Removing Power Steering Cooler & Mounting Bolts
    GM687448Courtesy of GENERAL MOTORS CORP.
  4. Remove the power steering cooler mounting bolts.
    5. Fig 3: Removing Power Steering Cooler & Radiator Support
    GM687449Courtesy of GENERAL MOTORS CORP.
  5. Remove the power steering cooler from the radiator support.
scientia non olet · About LEMON Manuals