LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Power Rack & Pinion Steering System) >> Repair Instructions >> Power Steering Cooler Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Power Steering Cooler & Radiator Support
    GM687449Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering cooler to the radiator support.
    2. Fig 2: Installing Power Steering Cooler & Mounting Bolts
    GM687448Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the power steering cooler mounting bolts.

    Tighten:  Tighten the power steering cooler mounting bolts to 20 N.m (15 lb ft).

    3. Fig 3: View Of Power Steering Hose Assembly At Power Steering Cooler
    GM687441Courtesy of GENERAL MOTORS CORP.
  3. Connect the power steering hoses assembly to the power steering cooler.
  4. Remove drain pan from under the vehicle.
  5. Install the radiator air intake baffle. Refer to AIR INTAKE BAFFLE REPLACEMENT - RADIATOR .
scientia non olet · About LEMON Manuals