Park Brake Warning Lamp Switch: Installation
WARNING: This page is about a different car, the 2003 Buick Regal, 2003 Buick Century, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Install the parking brake indicator switch. See Figure .
- Install the mounting screw. Tighten to specifications. See TORQUE SPECIFICATIONS .
- Connect the electrical connector to the switch. Check the operation of the switch.
- Install the left carpet retainers. Install the left side instrument panel insulator.