LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Adjusting Screw >> Installation

Adjusting Screw: Installation

WARNING: This page is about a different car, the 2003 Buick Regal, 2003 Buick Century, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the Brake Shoe Spanner and Spring Remover in order to spread the brake shoes apart.
  2. Install the adjuster.
  3. Install the adjuster spring. Install the straight end of the adjuster spring into the brake shoe. Install the hook end of the adjuster spring to the adjuster actuator.
  4. Adjust the rear drum brakes. See DRUM BRAKE ADJUSTMENT  under DRUM BRAKES in ADJUSTMENTS & INSPECTIONS.
  5. Install the brake drum. See BRAKE DRUM  .
  6. Install the rear wheel and tire.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals