LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 515 (Vibration - Drivetrain) >> Vibration Diagnostic Aids >> Vibration Intermittent Or Not Duplicated >> Temperature, Ground-Out, Accessory Load

Temperature, Ground-Out, Accessory Load

WARNING: This page does not describe the selected car, but rather 58 other vehicles, including the 2003 Saturn Vue, 2003 Saturn L300, 2003 Saturn Ion 3, 2003 Saturn Ion 2, and 2003 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Flat Spots On Tires  - Tires which have sat and been cool for a time can develop flat spots.

Irregular Wear On Tire Treads  - Tires which have sat and been cool for a time will be stiffer and any irregular wear conditions will be more noticeable than they will be once the tires have warmed and softened.

Exhaust System Growth  - Exhaust systems may exhibit a ground-out condition when cool which goes away once the system hot. The opposite may be true that the exhaust system is fine when cool but a ground-out condition occurs once the system reaches operating temperatures. Exhaust systems can grow by 1-2" (2.5-5 cm) when hot.

Engine-Driven Accessory Noises: 

  1. Belt Whipping - An engine accessory drive belt, or belts could exhibit a whipping condition if a belt is deteriorating and deposits are building up on the underside of the belt.
  2. Loose Mounting Brackets or Component Ground Out - Engine driven accessories such as a generator, a power steering pump, or an air conditioning compressor could exhibit noise conditions due to either loose mounting brackets or due to related components of the system in a ground-out condition during certain operation of that accessory system.
  3. Cold or Hot - These accessories could exhibit noise conditions when cool which go away once they are fully warmed-up, or the opposite may be true.
  4. Load on an Accessory Component - These accessories could exhibit a noise condition while under a heavy load, perhaps when combined with a cool or fully warmed-up condition.
  5. Bent or Misaligned Pulleys - Bent or mis-aligned pulleys in one or more engine-driven accessory systems could contribute to a noise or vibration condition.
  6. Fluid Level in Accessory Systems - These accessories could exhibit a noise condition due to an abnormal amount of fluid contained in the system of which the accessory is a part.
    • An improper power steering fluid level could produce noises in the power steering system.
    • An improper air conditioning refrigerant level or an excessive amount of refrigerant oil could produce noises or possibly vibrations in the air conditioning system.
  7. Incorrect Fluid Type in Accessory Systems - These accessories could exhibit a noise condition due to the incorrect type of fluid contained in the system of which the accessory is a part.