LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 515 (Vibration - Drivetrain) >> Description & Operation >> Vibration Theory & Terminology >> Beating (Phasing)

Beating (Phasing)

WARNING: This page does not describe the selected car, but rather 58 other vehicles, including the 2003 Saturn Vue, 2003 Saturn L300, 2003 Saturn Ion 3, 2003 Saturn Ion 2, and 2003 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Two separate disturbances that are relatively close together in frequency will lead to a condition called beating, or phasing. See Fig 1 . A beating vibration condition will increase in intensity or amplitude in a repetitive fashion as the vehicle travels at a steady speed. This beating vibration can produce the familiar droning noise heard in some vehicles.

Beating occurs when 2 vibrating forces are adding to each other's amplitude. However, 2 vibrating forces can also subtract from each other's amplitude. The adding and subtracting of amplitudes in similar frequencies is called beating. In many cases, eliminating either one of the disturbances can correct the condition.

Fig 1: Identifying Beating (Phasing)
G00310778Courtesy of GENERAL MOTORS CORP.