TRIPOT Joint
WARNING: This page is about a different car, the 2003 Pontiac Aztek, 2003 Buick Rendezvous, 2002 Pontiac Aztek, 2002 Buick Rendezvous, and 2001 Pontiac Aztek. However, it is still accessible from the selected car via links, so may be relevant.
The front axle shaft tripot joint is made without an over-extension limitation retainer. The joint is constructed as follows:
- The left front wheel drive axle has a female spline. The female spline installs over a stub shaft that protrudes from the transaxle.
- The right front wheel drive axle has a male spline. The right front wheel drive axle uses a barrel-type retaining ring in order to interlock with the transaxle gears.