Removal (Front)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Release the park brake.
Remove the park brake pedal. See PARK BRAKE PEDAL ASSEMBLY .
Roll the carpet back to access cable grommet. See Fig 1.
Raise and support the vehicle.
Disengage the grommet and the cable from the floor pan. See Fig 2.
Disconnect the front cable from the intermediate cable.
Remove the cable from the body mount by depressing the retaining tabs.
Remove the cable.

Fig 1: Accessing Cable Grommet

Courtesy of GENERAL MOTORS CORP.

Fig 2: Disengaging Grommet & Cable From Floor Pan

Courtesy of GENERAL MOTORS CORP.