LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Disc Brakes) >> Removal & Installation >> Park Brake Cable >> Installation (Intermediate)

Installation (Intermediate)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the intermediate cable.
  2. Connect the intermediate cable to the front cable. See Figure.
  3. Connect the equalizer to the rear park brake cables.
  4. Install the nut to the threaded end of the intermediate cable. See Figure. Tighten the nut to specifications. See TORQUE SPECIFICATIONS .
  5. Remove the safety stands.
  6. Lower the vehicle.
  7. Adjust the park brake system. See PARK BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
scientia non olet · About LEMON Manuals