Removal (2500 & 3500 Series)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- Release the park brake.
- Raise and support the vehicle.
- Remove the tire and wheel assembly.
- Relieve the tension from the park brake cable by pulling down on the cable in front of the equalizer and removing the cable from the equalizer bar.
- Remove the rear park brake cable from the park brake actuator lever.
- Remove the rotor. See BRAKE ROTOR .
- Remove the park brake shoe. See PARK BRAKE SHOES .
- Remove the actuator lever from the backing plate.