Installation (2500 & 3500 Series)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the actuator lever to the backing plate.
- Install the park brake shoe. See PARK BRAKE SHOES .
- Adjust the park brake shoe. See PARK BRAKE ADJUSTMENT under ADJUSTMENTS & INSPECTION.
- Install the rotor. See BRAKE ROTOR .
- Install the rear park brake cable to the park brake actuator lever.
- Tighten the nut to the intermediate cable at the equalizer. See TORQUE SPECIFICATIONS .
- Install the tire and wheel assembly. Tighten to specification. See TORQUE SPECIFICATIONS .
- Remove the safety stands.
- Lower vehicle.
- Adjust park brake cable. See PARK BRAKE ADJUSTMENT under ADJUSTMENTS & INSPECTION.