Front Disc Brake Splash Shield: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle.
Remove the tire and wheel assembly.
Remove the hub and bearing assembly. See WHEEL HUB & BEARINGS under REMOVAL & INSTALLATION in appropriate FRONT article in SUSPENSION.
Remove the splash shield. See Fig 1 or Fig 2 .

Fig 1: Removing Splash Shield

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing Front Splash Shield

Courtesy of GENERAL MOTORS CORP.