LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Disc Brakes) >> Removal & Installation >> Brake Rotor >> Removal (Rear - Pickup With Dual Wheels)

Removal (Rear - Pickup With Dual Wheels)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake.
  2. Raise and support the vehicle.
  3. Remove the tire and wheel assembly.
  4. Remove the hub and rotor assembly. See HUB & ROTOR ASSEMBLY under REMOVAL & INSTALLATION in appropriate DIFFERENTIALS article in DRIVELINE/AXLES.
  5. Mark the relationship of the hub to the rotor. Place the hub and rotor assembly on a hydraulic press. Press the wheel studs out of the hub and rotor assembly.
scientia non olet · About LEMON Manuals