Brake Pedal Assembly: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Remove the pushrod retaining clip. See Fig 1.
Remove the stoplight switch and the pushrod from the brake pedal stud.
Remove the nut from the brake pedal bolt. See Fig 2.
Remove the brake pedal bolt.
Remove the brake pedal.

Fig 1: Removing & Installing Stoplight Switch

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing Nut From Brake Pedal Bolt

Courtesy of GENERAL MOTORS CORP.