LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Disc Brakes) >> Removal & Installation >> Brake Pedal Assembly >> Installation

Brake Pedal Assembly: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake pedal.
  2. Install the brake pedal bolt. See Figure.
  3. Install the nut to the brake pedal bolt. Hold the nut with a wrench and tighten the brake pedal bolt to specification. See TORQUE SPECIFICATIONS .
  4. Install the pushrod and the stoplight switch to the brake pedal pin. See Figure.
  5. Install the pushrod retaining clip.
scientia non olet · About LEMON Manuals