LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Disc Brakes) >> Adjustments & Inspections >> Park Brake Adjustment >> Park Brake Shoe Adjustment - Pickup All Others

Park Brake Shoe Adjustment - Pickup All Others

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, and 2003 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the Drum-To-Brake Shoe Clearance Gauge (J-21177-A) so that it contacts the inside diameter of the rotor. See Fig 1.
  2. Position the drum-to-brake shoe clearance gauge over the shoe and the lining at the widest point. See Fig 2.
  3. Turn the adjuster nut until the lining just contacts the drum-to-brake shoe clearance gauge.
  4. Repeat steps  1- 3 for the opposite side.
  5. The clearance between the park brake shoe and the rotor is 0.026" (0.6604 mm).
Fig 1: Setting Gauge On Inside Diameter Of Rotor
G00310129Courtesy of GENERAL MOTORS CORP.
Fig 2: Positioning Gauge On Shoe & Lining
G00310130Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals