LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 511 (Disc Brakes (Cab & Chassis, & Hd)) >> Removal & Installation >> Rear Disc Brake Backing Plate >> Removal

Rear Disc Brake Backing Plate: Removal

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the tire and the wheel assembly.
  3. Remove the rear disc brake rotor. See BRAKE ROTOR  .
  4. Remove the bolts securing the backing plate to the axle flange.
  5. Remove the backing plate.
scientia non olet · About LEMON Manuals