Park Brake Pedal Assembly: Removal

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The C3500HD pedal looks the same as the other models, but uses a different torque applying pedal assembly.

Release the park brake.
Disconnect the electrical connector from the park brake switch.
Disconnect the release cable. See Fig 1 .
Remove the release handle. See Fig 2 .
Remove the 3 bolts from park brake pedal assembly. See Fig 1 .
Remove the pedal assembly.

Fig 1: Disconnecting Release Cable

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing Release Handle

Courtesy of GENERAL MOTORS CORP.