LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 511 (Disc Brakes (Cab & Chassis, & Hd)) >> Removal & Installation >> Park Brake Cable >> Removal

Park Brake Cable: Removal

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake.
  2. Raise the vehicle and support the vehicle with safety stands.
  3. Remove the cotter pin. See Fig 1 .
  4. Remove the clevis pin.
  5. Disconnect the clevis from the cable.
  6. Disconnect the grommet from the bracket.
  7. Remove the cable from the clip. See Fig 2 .
  8. Disconnect the grommet from the body.
  9. Disconnect the retaining fingers from the lever. See Fig 3 .
  10. Remove the cable assembly.
Fig 1: Removing Cotter Pin
G00317538Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Cable From Clip
G00317539Courtesy of GENERAL MOTORS CORP.
Fig 3: Disconnecting Retaining Fingers
G00317540Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals