LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 511 (Disc Brakes (Cab & Chassis, & Hd)) >> Removal & Installation >> Hydraulic Brake Booster >> Installation

Hydraulic Brake Booster: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the gasket. See Figure .
  2. Install the booster assembly.
  3. Install the 4 booster nuts. Tighten the nuts to specification. See TORQUE SPECIFICATIONS  .
  4. Install the pushrod to the brake pedal pin. See Figure .
  5. Install the stoplight switch. See STOPLIGHT SWITCH  .
  6. Install the spacer, the wiring harness bracket, and the master cylinder to the booster assembly. See Figure .
  7. Install the 2 master cylinder nuts. See Figure . Tighten the nuts to specification. See TORQUE SPECIFICATIONS  .
  8. Connect the return hose, steering gear hose, and inlet hoses.
  9. Bleed the hydraulic booster system.
scientia non olet · About LEMON Manuals