LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 511 (Disc Brakes (Cab & Chassis, & Hd)) >> Removal & Installation >> Disc Brake Hardware >> Removal (Front)

Removal (Front)

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle.
  2. Remove the tire and the wheel assembly.
  3. Remove the caliper lock mounting bolt. See Figure .
  4. Remove the support key and the spring.
  5. Drive out the support key and spring using a brass punch and a hammer. See Figure .
scientia non olet · About LEMON Manuals