Rear Drum Brake Hose: Installation
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Ensure that there are not kinks in the brake hose. Align the hose fitting with the notch in the brackets. Install the brake hose to the brackets. Install the brake hose retainers to the hose fittings. Install the brake pipes to the brake hose. Tighten the fittings to specifications. See TORQUE SPECIFICATIONS . Bleed the hydraulic brake system. BLEEDING BRAKE SYSTEM . Lower the vehicle.