LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the air filter hose clamp and remove the air filter hose from the throttle body. Unhook the air filter housing hooks and remove the top portion of the housing with the hose.
  2. Remove the master cylinder reservoir. See MASTER CYLINDER RESERVOIR  . Remove the 2 brake pipes from the master cylinder. See Figure . On non-ABS vehicles, remove the 3 brake pipes from the 3-way fitting. On ABS vehicles, remove the 2 brake pipes from the 2-way fitting.
  3. On all vehicles, remove master cylinder mounting nuts. Remove the check valve bracket. Remove the 2-way (ABS) or 3-way (non-ABS) fitting. Remove the master cylinder from the vehicle.
scientia non olet · About LEMON Manuals