LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Drum Brake Adjusting Hardware >> Removal

Drum Brake Adjusting Hardware: Removal

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Remove the rear wheel and tire. Remove the brake drum. See BRAKE DRUM  .
  2. Remove the adjusting hardware with the shoes. See BRAKE SHOES  . See Figure .