Drum Brake Adjusting Hardware Inspection
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect the adjuster actuator spring for the following:
- Excessive Corrosion
- Excessive Stretching
- Broken Hook Ends
- Twisting
- Binding
- If any of the listed conditions were found, the drum brake system adjuster hardware requires replacement. Inspect the adjuster assemblies for the following conditions:
- Bent
- Broken
- Missing Or Broken Spring Attachment Tab
- If any of the listed conditions were found, the adjuster actuator lever and/or attaching hardware requires replacement.