LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Computer Relearn Procedures) >> General Motors (Cars) >> SATURN >> Crankshaft Learn Procedure (2.2L)

Crankshaft Learn Procedure (2.2L)

WARNING: This page does not describe the selected car, but rather 98 other vehicles, including the 2001 Saturn SW2, 2001 Saturn SL2, 2001 Saturn SL1, 2001 Saturn SL, and 2001 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
  1. The Powertrain Control Module (PCM) uses crankshaft velocity calculations to determine engine misfire and to operate engine misfire self-diagnostics. PCM must know precisely the variation between notches on the crankshaft. PCM contains crankshaft learn procedure which learns the variation between notches on crankshaft. The crankshaft learn procedure must be reset if PCM, crankshaft, or crankshaft position sensor are replaced.
  2. Start engine and allow engine to reach at least 158°F (70°C). Turn A/C off and place transmission in Park or Neutral. Using scan tool, perform CRANKSHAFT POSITION VARIATION LEARN. Accelerate engine to 4000 RPM. When fuel cut occurs, release throttle. PCM learns crankshaft as engine decelerates.
scientia non olet · About LEMON Manuals