Brake Pedal Height & Stoplight Switch
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Once the brake switch clearance has automatically been adjusted, it cannot be adjusted again. Therefore, replace the switch with a new one when replacing the power brake unit or the pedal, or performing any procedure that changes the pedal stroke.
Measure the distance from the center of the upper surface of the pedal pad to the floor covering and verify that it is as specified. If not within the specification, replace the brake pedal.
BRAKE PEDAL HEIGHT SPECIFICATIONS
| Application | In. (mm) |
|---|---|
| Pedal Released | 5.37 (136.4) |