Park Brake Lever Assembly: Removal
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the floor console. See Fig 1 .
- Disable the Park Brake Automatic Adjuster. See PARK BRAKE CABLE AUTOMATIC ADJUSTER under ADJUSTMENT & INSPECTIONS.
- Raise and suitably support the vehicle.
- Disconnect the park brake cables from the equalizer. See Figure .
- Lower the vehicle.
- Disconnect the electrical connector from the park brake warning lamp switch.
- Remove the remaining park brake lever retaining nut. See Fig 2 .
- Remove the park brake lever assembly from the vehicle.