LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Hoses >> Removal (Front)

Removal (Front)

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake hose retaining bolt from the frame.
  2. Install a rubber cap or plug on the brake pipe fitting.
  3. Remove the brake hose bolt from the brake caliper assembly.
  4. Remove the brake hose from the vehicle.
  5. Remove and discard the copper gaskets.
scientia non olet · About LEMON Manuals