Removal (Front)
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle. Remove the tire and wheel assembly.
- Remove the front brake hose bolt. See Fig 1 .
- Install a plug in the front brake caliper hose in order to prevent excessive brake fluid loss and contamination.
- Discard the metal/copper gaskets. DO NOT reuse them replace with NEW metal/copper gaskets.
- Remove the front brake caliper guide pin bolts. See Figure .
- Remove the front brake caliper from the mounting bracket.